Garrett Middle School 
 5235 Austell-Powder Springs Road  ▪   Austell, GA  30106   ▪    Phone: (770) 819-2466   ▪    Fax: (770) 819-2468   ▪   Directions

Home Faculty 25 Book Campaign Parents Students Media Center Connections PTSA
 

LCD Projector Use

Turn on computer first.

 
Press the MAIN power switch on the side of the LCD.  The Power indicator lights up on the top of the LCD.  The projector is in standby.
Press the STANDBY/ON button on the top of the LCD.
Select the input source by pressing the INPUT button on the top of the LCD until you see COMPUTER appear on your screen.
Adjust the focus by turning the ring on the front.
Laptop only - If image does not appear on both screens, press the FUNCTION key and the F8 key at the same time on the laptop.
POWERING OFF
Press the STANDBY/ON button.
Message appears on screen:  POWER OFF?  YES:  PRESS AGAIN.  Press the STANDBY/ON button again to turn off lamp.  Fan remains on.  
Leave the MAIN power switch on until the fan stops or the LCD has cooled down - about 1 min.

 

Created by Karii Zimmerman, 2002.  Last updated  08/15/2006